This allows you to connect the shifter to any table-like surface. The lever uses M10 thread, so you’ll also be able to attach any other 3rd party knob which is compatible with this size. Changing the lever or knob can be done in under a minute.Įvery shifter is supplied with a table clamp. Combined with the different levers, this allows you to vary the combined length of the lever/knob assembly (measured from the top of the main shifter unit) from 76mm to 140mm, As the resistance in the shifter unit itself is fixed, you can vary the shifting force by attaching a longer or shorter lever.Īdditionally, every shifter is supplied with 3 types of plastic shifter knobs with lengths varying from 46mm to 90mm. Depending on the setup of the shifter, the required shifting force varies by approximately 4,0kg (8,8lbs) to 6,5kg (13,2lbs).Įvery shifter is supplied with three different levers: one straight 30mm lever, one straight 50mm lever and one bent 50mm lever. Using a ball spring resistance system, shifting requires an early peak force after which resistance drops, making it feel as if it slides into gear. The Heusinkveld Sim Shifter Sequential is a durable and compact sequential shifter system, which allows it to be installed in the tightest simulator environments such as formula car tubs. Heusinkveld Engineering presents a durable and compact sequential shifter solution which emulates the feel of a real sequential shifter and can be set-up in many different configurations. Many racecars use a stick-activated sequential gearbox.
0 Comments
Leave a Reply. |